SEARCH:

Which mandibular plane is considered while calculating FMA (Frankfort mandibular plane angle) in cephalometry?

The mandibular plane used for FMA measurement is : A plane tangent to the lower border of mandible which connects with the menton anteriorly and posteriorly it bisects the distance between the right and left lower borders of the mandible in the region of the gonial angle. See Figure. 


The FMA angle is defined as the angle formed by the following two reference planes:
i. FH plane (Frankfort horizontal plane—A line between the most superior point of the external auditory meatus and inferior border of the orbit).
ii. Mandibular plane (A plane tangent to the lower border of mandible which connects with the menton anteriorly and posteriorly it bisects the distance between the right and left lower borders of the mandible in the region of the gonial angle). 

In most cephalometric analyses, the occlusal and mandibular planes are measured relative to the sella-nasion (SN) line, the basion-nasion (BaN) line, or the Frankfort horizontal plane. Ideally, according to Tweed, the incisor mandibular plane angle (IMPA) should be 90 degrees, the Frankfort mandibular angle (FMA) 25 degrees, and thus the Frankfort mandibular incisor angle (FMIA) 65 degrees. (The sum of three angles of a triangle equals 180 degrees.) Moreover, the IMPA angle also relates to creating additional space in the mandibular arch in that for each 3 degrees advancement of the lower incisor, 2.5 mm of space is gained in the mandibular dental arch. Conversely, reduction of the IMPA from 90 degrees, for example, to 87 degrees would decrease the available space for tooth alignment in the mandibular dental arch by 2.5 mm. 



Gangrene due to known infectious agent is:

 # Gangrene due to known infectious agent is:
 A. Wet gangrene
B. Dry gangrene
C. Pyoderma granulosum
D. Fournier gangrene


The correct answer is D. Fournier gangrene. 

Fournier gangrene, a relatively rare form of necrotizing fasciitis, is a rapidly progressive disease that affects the deep and superficial tissues of the perineal, anal, scrotal, and genital regions. Named after Dr. Alfred Fournier, the French dermatology and venereal specialist, it was initially described in 1883 as necrotizing fasciitis of the external genitalia, perineal, and perianal region in five of Dr. Fournier’s patients. Also known as necrotizing fasciitis, the disease involves the rapid spread of severe inflammatory and infectious processes along fascial planes affecting adjacent soft tissue; therefore, the disease may initially go unnoticed or unrecognized as there may be minimal or no skin manifestations in its early stages.

This disease process results from polymicrobial aerobic and anaerobic synergistic infection of the fascia and subcutaneous soft tissue. Gram-positive bacteria such as Group A Streptococci and Staphylococcus aureus and gram-negative bacteria such as E. Coli and Pseudomonas aeruginosa are organisms most commonly grown in wound cultures of Fournier gangrene patients as it is usually polymicrobial. These bacteria can be introduced through several sources, including urinary, bowel, or dermal. Urinary tract infections and other infectious processes of the perineum, such as perianal abscesses or even a simple pimple, may also provide a starting point for the infection. 

Surgical manipulation of the genital and perineal area similarly can provide the initial insult required to develop Fournier gangrene. Any traumatic insult or localized area of skin breakdown to the perineum or scrotum can lead to bacterial access to the subcutaneous tissues and begin the process, ultimately resulting in Fournier gangrene. About 25% of cases had no known or identifiable etiology.

Biosafety level 4 (BSL-4) pathogen is:

 # Biosafety level 4 (BSL-4) pathogen is:
 A. XDR strain of Mycobacterium tuberculosis
B. SARS CoV-2
C. Ebola
D. Measles


The correct answer is C. Ebola.

Biological Safety Levels (BSL) are a series of protections relegated to the activities that take place in particular biological labs. They are individual safeguards designed to protect laboratory personnel, as well as the surrounding environment and community.

These levels, which are ranked from one to four, are selected based on the agents or organisms that are being researched or worked on in any given laboratory setting. For example, a basic lab setting specializing in the research of nonlethal agents that pose a minimal potential threat to lab workers and the environment are generally considered BSL-1—the lowest biosafety lab level. A specialized research laboratory that deals with potentially deadly infectious agents like Ebola would be designated as BSL-4—the highest and most stringent level.

The Centers for Disease Control and Prevention (CDC) sets BSL lab levels as a way of exhibiting specific controls for the containment of microbes and biological agents. Each BSL lab level builds upon on the previous level—thereby creating layer upon layer of constraints and barriers. These lab levels are determined by the following:
  • Risks related to containment
  • Severity of infection
  • Transmissibility
  • Nature of the work conducted
  • Origin of the microbe
  • Agent in question
  • Route of exposure
 Summary of Biological Agents and BSL levels


Once bone is formed, it grows by:

 # Once bone is formed, it grows by:
 A. Interstitial growth only
B. Appositional growth only
C. Both appositional and interstitial growth
D. Degenerative changes into bony structures


The correct answer is B. Appositional growth only.

Which is growth by the addition of new layers on those previously formed. Bone formation begins in the embryo where mesenchymal cells differentiate into either fibrous membrane or cartilage. 

This leads to two paths of bone development:
1. Intramembranous ossification is so called because it takes place in membranes of connective tissue. Osteoprogenitor cells in the membrane differentiate into osteoblasts: a collagen matrix is formed which undergoes ossification. Note: The maxilla and mandible as well as the cranial vault are forrmed this way.

2. Endochondral ossification is how the remainder of the skeleton forms and takes place within a hyaline cartilage model. Cartilage cells are replaced by bone cells (osteocytes replace chondrocytes), organic matrix is laid down and calcium and phosphate are deposited. This type of ossification is principally responsible for the formation of short and long bones. Note: The ethmoid, sphenoid, and occipital bones (bones of the cranial base) form this way.

The incisor overjet is increased for a class II case that is undergoing treatment. The reason is:

 # The incisor overjet is increased for a  class II case that is undergoing treatment. The reason is:
 A. Loss of anchorage
B. Arch collapse
C. Crowding in the lower arch
D. None of the above


The correct answer is A. Loss of anchorage.

Following are the features of anchorage loss in class II cases:
- Increase in overjet
- Molar relation  becoming more class II
- Normal canine relation without any change

Which of the following are typical and acceptable preventive and therapeutic measures for dealing with the periodontal problems during fixed appliance therapy?

 # Which of the following are typical and acceptable preventive and therapeutic measures for dealing with the periodontal problems during fixed appliance therapy?
 A. Elimination of gingivitis prior to placing orthodontic appliances
B. Home care instructions regarding the use of toothbrush and water pik during orthodontic treatment
C. Megavitamin therapy
D. Scaling and curettage immediately after appliance removal



The correct answer is A. Elimination of gingivitis prior to placing orthodontic appliances.


The mean value of visible plaque and visible inflammation showed significant increases during orthodontic treatment. Therefore, prior to orthodontic treatment, patients should have a high level of periodontal health and it should be maintained during the treatment period. Considering the relationship between orthodontic treatment and gingival health, patients, orthodontists and periodontists should cooperate during orthodontic treatment.

Reference: Boke F, Gazioglu C, Akkaya S, Akkaya M. Relationship between orthodontic treatment and gingival health: A retrospective study. Eur J Dent. 2014;8(3):373-380. doi:10.4103/1305-7456.137651

FDA approved locally delivered minocycline for subgingival placement is marketed under trade name:

 # FDA approved locally delivered minocycline for subgingival placement is marketed under trade name:
 A. Periochip
B. Atridox
C. Arestin
D. Elyzol


The correct answer is C. Arestin.

FDA has approved Arestin 2% Minocycline for subgingival placement as an adjunct to scaling and root planning.

Periochip: Chlorhexidine chip placed in the pocket for local drug delivery.